News of our company


Archive of news
 
24.12.21 00:41
Admiralty Shipyards have completed the 1st stage of sea trials of the lead large freezer fishing trawler-processor ST-192 "Kapitan Vdovychenko"

Admiralty Shipyards have successfully completed the first stage of sea trials of the lead 108-meter-long big freezer fishing trawler-processor of ST-192 project "Kapitan Vdovichenko" (building number 02480).
 
The trials of the ST-192 project vessel took place in the vicinity of Gogland Island in the Gulf of Finland. The delivery team tested the main engine and auxiliary diesel generators of the vessel, conducted sailing and speed tests, took vibration measurements. The specialists have tested the navigational complex and radio communication systems, the fuel, oil and general cargo systems. The trawler also successfully passed the tractive effort test. The first stage of the factory sea trials showed that the main characteristics of the ultramodern vessel meet the contractual obligations.
 
Admiralty Shipyards have completed the 1st stage of sea trials of the lead large freezer fishing trawler-processor ST-192 "Kapitan Vdovychenko".
 
A total of ten trawlers of the ST-192 project have been ordered.
 
The customer is the Russian Fishery Industry Company.
 
The technical design of ST-192 was developed by the Marine Engineering Bureau. The WCD was developed by the Vympel Design Bureau.
 
The supertrawlers under construction for the RRPK are the largest and most technologically advanced Russian fishing vessels. Each new vessel is designed for an annual catch of more than 60 thousand tons of fish, which is in 2.5 times higher than the productivity of the vessels that currently form the basis of the fishing fleet in the Far East of the Russian Federation.
 
Main aim of the vessel is catching pelagic and near-bottom pelagic type fish, also manufactory of frozen production during the voyage; with full cycle of take processing onboard vessel directly.
 
The main types of catching fish: Alaska Pollack, Herring, Mackerel.
 
The main types of production: decapitate and drawn fish, filleted fish, Alaska Pollack caviar (frozen), surimi, also fishmeal and fish oil.
 
Production storage is provided in the main refrigerating hold (capacity 4250 m³) after processing and freezing. Fishmeal and other frozen production are stored in 2 holds (capacity 400 and 600 m³). Also 300 m³ hold is foreseen for storage of carrying carton, fish meal and other production.
 
Storage of fish oil is provided by 2 tanks of 100 m³ summarized capacity made from food stainless steel.
 
The vessel is equipped for work with single trawl.
 
The vessel's general particulars are as follows:
 
Length overall is about 108.2 m;
Breadth is 21.0 m;
Depth up to main deck is 8.35 m;
Depth up to trawl deck is 11.55 m;
Maximal aft draught is 8.99 m.
 
Russian Maritime Registry of Shipping class notation is KM IA Super (hull) Ice 3 (power) AUT 1 REF BWM (T) Fishing vessel.
 
Assumed vessel's operational areas are as follows: eastern coast of Russian Federation, Bering Sea, Sea of Okhotsk and adjusted regions.
 
Vessel's hull strengthen in accordance with requirements of Finnish-Swedish ice class IA Super.
 
Design vessel's speed 15 kn is provided by single 8120 kW main diesel that drives controllable pitch propeller in fixed nozzle.
 
Manoeuvrability, including at low speed with trawl, is provided by single steering complex (rotor type steering gear + ruder with flap).
 
950 kW bow thruster is foreseen to improve manoeuvrability at low speed.
 
Work of vessel's power plant is provided by two diesel-generators (1880 and 1460 kW) and also by shaft-generator (4126 kW). Besides, emergency diesel-generator (240 kW) is foreseen.
 
Vessel's hull, super-structure and wheel-house are made from steel; high-strength wearproof grade like D690 and Hardox 450 are used for trawl deck. Except paining, applied current system is used as corrosion protection for underwater hull. Moreover, zinc sputtering (metallization) is foreseen for outer and inner surfaces of constructions that are subject to influence of aggressive environment.
 
Two cranes are foreseen for work during marine fishing, as follows: 8 t one of 17 m outreach (in the middle) and 8 t one of 8 m outreach (in aft).
 
Fore and aft gantries with cargo double 5 t derricks are foreseen for marine cargo transferring.
 
Shipping equipment (trawl systems), anchor-mooring mechanisms and winches of cargo derricks are bought together with automatic control systems.
 
Fully equipped fish processing system provides water pumping through refrigerated fish tanks, sorting, processing, freezing, packing, storage and unloading of production. production freezing will be carried out in horizontal automatic plate freezers of summarized capacity 260 t/day.
 
Equipment for surimi production with separate laboratory is foreseen, it capacity is 80 t/day. There is also fish meal plant with daily processing of 250 t of raw material.
 
Transportation of prepared production and packaging material through the vessel is carried out with help of two cargo elevators and special cargo conveyor within freezing holds.
 
Arrangement of 40 crewmembers is provided at comfortable single or double cabins, and factory staff (max. 99 people) is arranged at single, double or four-bed cabins.
 
Onboard the vessel there are separate mess-rooms for officers and other crew with self-service zone, crew recreation room, all necessary medical, sanitary-common and sanitary-hygienic rooms in accordance with requirements of Sanitary Regulations for Fishing Vessels. Additionally, there is cinema hall, sport complex including the gym, saunas.
 
Passive roll damping system is foreseen for providing comfortable conditions at non-fully loading conditions. Diesel oil is used as working liquid in the roll damping system.
 
The vessel is completed by radio and navigation equipment in accordance with vessel's class and accepted navigation area, also by complex of specialized trawl equipment including sliding fish-finding sonars and trawl parameters control system.
 
The keel of the head vessel (at Admiralty shipyards) ST-192 m/v "Kapitan Vdovichenko" (building No. 02480) was laid 23.01.2019. She was launched on 27.03.2020.
The keel of the second vessel "Mekhanik Maslak" (building No. 02481) was laid 08.04.2019. She was launched on 23.06.2020.
The keel of the third vessel "Mekhanik Sizov" (building No. 02482) was laid 30.06.2020. She was launched on 25.07.2021.
The keel of the fourth vessel "Kapitan Martynov" (building No. 02483) was laid 05.08.2020. She was launched on 24.09.2021.
The keel of the fifth vessel "Kapitan Yunak" (building No. 02484) was laid 05.06.2021.
The keel of the sixth vessel "Mekhanik Shcherbakov" (building No. 02485) was laid 29.09.2021.